INA
| Średnica wewnętrzna d | 500mm |
|---|---|
| Średnica zewnętrzna D | 620mm |
| Masa | 42,7kg |
| Temperatura pracy | -30…80 °C |
| Basic dynamic load rating, radial (for radial load only) | 390 000N |
|---|---|
| Basic static load rating, radial (for radial load only) | 1 210 000N |
| Running accuracy, axial | 0,01mm |
| Basic dynamic load rating, axial | 550 000N |
| Basic static load rating, axial | 2 470 000N |
| Dimensions identical to ISO dimension series 18 | 618/500 |
| Inner diameter outer ring | 561,2mm |
| Bore diameter lower tolerance |
76 874,80 złnetto
+ VAT 23% = 94 556,00 zł brutto
Dobierz 9 szt., żeby zejść do 73 031,06 zł
| od 1 szt. | — | 76 874,80 zł |
| od 10 szt. | −5% | 73 031,06 zł |
| od 50 szt. | −8% | 70 724,82 zł |
| od 250 szt. | −12% | 67 649,82 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| -0,032mm |
| Bore diameter upper tolerance | 0,008mm |
|---|
| Rolling element pitch circle diameter | 560mm |
|---|
| Diameter of lubrication hole | 2,5mm |
|---|
| Height of the assembled bearing | 56mm |
|---|
| Height of individual ring | 56mm |
|---|
| Height inner ring | 56mm |
|---|
| Height of individual ring lower tolerance | -0,05mm |
|---|
| Height of individual ring upper tolerance | 0mm |
|---|
| Limiting speed for grease lubrication with normal clearance | 135 1/min |
|---|
| Limiting speed for oil lubrication with normal clearance | 275 1/min |
|---|
| Outer diameter inner ring | 558,8mm |
|---|
| Maximum axial tilting clearance, at standard bearing clearance | 0,12mm |
|---|
| Maximum radial bearing clearance, at standard bearing clearance | 0,06mm |
|---|
| Minimum axial tilting clearance, at standard bearing clearance | 0,03mm |
|---|
| Minimum radial bearing clearance, at standard bearing clearance | 0,015mm |
|---|
| Chamfer dimension | 3mm |
|---|
| Outside diameter lower tolerance | -0,044mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Running accuracy, radial | 0,04mm |
|---|
| Width lower tolerance | -0,16mm |
|---|
| Width upper tolerance | 0,16mm |
|---|
