INA
| Średnica wewnętrzna d | 70mm |
|---|---|
| Średnica zewnętrzna D | 90mm |
| Masa | 0,168kg |
| Temperatura pracy | -30…80 °C |
| Basic dynamic load rating, radial (for radial load only) | 11 800N |
|---|---|
| Basic static load rating, radial (for radial load only) | 25 500N |
| Running accuracy, axial | 0,01mm |
| Basic dynamic load rating, axial | 16 600N |
| Basic static load rating, axial | 52 000N |
| Dimensions identical to ISO dimension series 18 | 61 814 |
| Inner diameter outer ring | 80,5mm |
| Bore diameter lower tolerance |
2571,20 złnetto
+ VAT 23% = 3162,58 zł brutto
Dobierz 9 szt., żeby zejść do 2442,64 zł
| od 1 szt. | — | 2571,20 zł |
| od 10 szt. | −5% | 2442,64 zł |
| od 50 szt. | −8% | 2365,50 zł |
| od 250 szt. | −12% | 2262,66 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| -0,015mm |
| Bore diameter upper tolerance | 0,004mm |
|---|
| Rolling element pitch circle diameter | 80mm |
|---|
| Diameter of lubrication hole | 1,2mm |
|---|
| Height of the assembled bearing | 10mm |
|---|
| Height of individual ring | 10mm |
|---|
| Height inner ring | 10mm |
|---|
| Height of individual ring lower tolerance | -0,01mm |
|---|
| Height of individual ring upper tolerance | 0mm |
|---|
| Limiting speed for grease lubrication with normal clearance | 955 1/min |
|---|
| Limiting speed for oil lubrication with normal clearance | 1 910 1/min |
|---|
| Outer diameter inner ring | 79,5mm |
|---|
| Maximum axial tilting clearance, at standard bearing clearance | 0,03mm |
|---|
| Maximum radial bearing clearance, at standard bearing clearance | 0,015mm |
|---|
| Minimum axial tilting clearance, at standard bearing clearance | 0,006mm |
|---|
| Minimum radial bearing clearance, at standard bearing clearance | 0,003mm |
|---|
| Chamfer dimension | 0,6mm |
|---|
| Outside diameter lower tolerance | -0,022mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Running accuracy, radial | 0,01mm |
|---|
| Width lower tolerance | -0,06mm |
|---|
| Width upper tolerance | 0,06mm |
|---|
