INA
| Średnica wewnętrzna d | 140mm |
|---|---|
| Średnica zewnętrzna D | 175mm |
| Masa | 1,062kg |
| Temperatura pracy | -30…80 °C |
| Basic dynamic load rating, radial (for radial load only) | 45 500N |
|---|---|
| Basic static load rating, radial (for radial load only) | 109 000N |
| Running accuracy, axial | 0,01mm |
| Basic dynamic load rating, axial | 64 000N |
| Basic static load rating, axial | 223 000N |
| Dimensions identical to ISO dimension series 18 | 61 828 |
| Inner diameter outer ring | 157,7mm |
| Bore diameter lower tolerance |
3421,90 złnetto
+ VAT 23% = 4208,94 zł brutto
Dobierz 9 szt., żeby zejść do 3250,81 zł
| od 1 szt. | — | 3421,90 zł |
| od 10 szt. | −5% | 3250,81 zł |
| od 50 szt. | −8% | 3148,15 zł |
| od 250 szt. | −12% | 3011,27 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| -0,021mm |
| Bore diameter upper tolerance | 0,004mm |
|---|
| Rolling element pitch circle diameter | 157mm |
|---|
| Diameter of lubrication hole | 1,5mm |
|---|
| Height of the assembled bearing | 18mm |
|---|
| Height of individual ring | 18mm |
|---|
| Height inner ring | 18mm |
|---|
| Height of individual ring lower tolerance | -0,01mm |
|---|
| Height of individual ring upper tolerance | 0mm |
|---|
| Limiting speed for grease lubrication with normal clearance | 485 1/min |
|---|
| Limiting speed for oil lubrication with normal clearance | 975 1/min |
|---|
| Outer diameter inner ring | 156,3mm |
|---|
| Maximum axial tilting clearance, at standard bearing clearance | 0,04mm |
|---|
| Maximum radial bearing clearance, at standard bearing clearance | 0,02mm |
|---|
| Minimum axial tilting clearance, at standard bearing clearance | 0,01mm |
|---|
| Minimum radial bearing clearance, at standard bearing clearance | 0,005mm |
|---|
| Chamfer dimension | 1,1mm |
|---|
| Outside diameter lower tolerance | -0,025mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Running accuracy, radial | 0,015mm |
|---|
| Width lower tolerance | -0,06mm |
|---|
| Width upper tolerance | 0,06mm |
|---|
