INA
| Średnica wewnętrzna d | 180mm |
|---|---|
| Średnica zewnętrzna D | 225mm |
| Masa | 2,22kg |
| Temperatura pracy | -30…80 °C |
| Basic dynamic load rating, radial (for radial load only) | 70 000N |
|---|---|
| Basic static load rating, radial (for radial load only) | 177 000N |
| Running accuracy, axial | 0,01mm |
| Basic dynamic load rating, axial | 98 000N |
| Basic static load rating, axial | 360 000N |
| Dimensions identical to ISO dimension series 18 | 61 836 |
| Inner diameter outer ring | 202,8mm |
| Bore diameter lower tolerance |
4928,70 złnetto
+ VAT 23% = 6062,30 zł brutto
Dobierz 9 szt., żeby zejść do 4682,27 zł
| od 1 szt. | — | 4928,70 zł |
| od 10 szt. | −5% | 4682,27 zł |
| od 50 szt. | −8% | 4534,40 zł |
| od 250 szt. | −12% | 4337,26 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| -0,021mm |
| Bore diameter upper tolerance | 0,004mm |
|---|
| Rolling element pitch circle diameter | 202mm |
|---|
| Diameter of lubrication hole | 2mm |
|---|
| Height of the assembled bearing | 22mm |
|---|
| Height of individual ring | 22mm |
|---|
| Height inner ring | 22mm |
|---|
| Height of individual ring lower tolerance | -0,025mm |
|---|
| Height of individual ring upper tolerance | 0mm |
|---|
| Limiting speed for grease lubrication with normal clearance | 375 1/min |
|---|
| Limiting speed for oil lubrication with normal clearance | 755 1/min |
|---|
| Outer diameter inner ring | 201,2mm |
|---|
| Maximum axial tilting clearance, at standard bearing clearance | 0,05mm |
|---|
| Maximum radial bearing clearance, at standard bearing clearance | 0,025mm |
|---|
| Low clearance: Preload | 0,01mm |
|---|
| Low clearance: Radial clearance | 0,005mm |
|---|
| Minimum axial tilting clearance, at standard bearing clearance | 0,01mm |
|---|
| Minimum radial bearing clearance, at standard bearing clearance | 0,005mm |
|---|
| Chamfer dimension | 1,1mm |
|---|
| Outside diameter lower tolerance | -0,029mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Running accuracy, radial | 0,015mm |
|---|
| Width lower tolerance | -0,1mm |
|---|
| Width upper tolerance | 0,1mm |
|---|
