INA
| Średnica wewnętrzna d | 200mm |
|---|---|
| Średnica zewnętrzna D | 250mm |
| Masa | 2,957kg |
| Temperatura pracy | -30…80 °C |
| Basic dynamic load rating, radial (for radial load only) | 74 000N |
|---|---|
| Basic static load rating, radial (for radial load only) | 197 000N |
| Running accuracy, axial | 0,01mm |
| Basic dynamic load rating, axial | 104 000N |
| Basic static load rating, axial | 400 000N |
| Dimensions identical to ISO dimension series 18 | 61 840 |
| Inner diameter outer ring | 225,8mm |
| Bore diameter lower tolerance |
8110,20 złnetto
+ VAT 23% = 9975,55 zł brutto
Dobierz 9 szt., żeby zejść do 7704,69 zł
| od 1 szt. | — | 8110,20 zł |
| od 10 szt. | −5% | 7704,69 zł |
| od 50 szt. | −8% | 7461,38 zł |
| od 250 szt. | −12% | 7136,98 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| -0,024mm |
| Bore diameter upper tolerance | 0,004mm |
|---|
| Rolling element pitch circle diameter | 225mm |
|---|
| Diameter of lubrication hole | 2mm |
|---|
| Height of the assembled bearing | 24mm |
|---|
| Height of individual ring | 24mm |
|---|
| Height inner ring | 24mm |
|---|
| Height of individual ring lower tolerance | -0,025mm |
|---|
| Height of individual ring upper tolerance | 0mm |
|---|
| Limiting speed for grease lubrication with normal clearance | 340 1/min |
|---|
| Limiting speed for grease lubrication with preload | 170 1/min |
|---|
| Limiting speed for oil lubrication with normal clearance | 680 1/min |
|---|
| Limiting speed for oil lubrication with preload | 340 1/min |
|---|
| Outer diameter inner ring | 224,2mm |
|---|
| Maximum axial tilting clearance, at standard bearing clearance | 0,05mm |
|---|
| Maximum radial bearing clearance, at standard bearing clearance | 0,025mm |
|---|
| Low clearance: Preload | 0,01mm |
|---|
| Low clearance: Radial clearance | 0,005mm |
|---|
| Maximum bearing preload | 0,025mm |
|---|
| Minimum axial tilting clearance, at standard bearing clearance | 0,01mm |
|---|
| Minimum radial bearing clearance, at standard bearing clearance | 0,005mm |
|---|
| Chamfer dimension | 1,5mm |
|---|
| Minimum bearing preload | 0,005mm |
|---|
| Outside diameter lower tolerance | -0,029mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Running accuracy, radial | 0,015mm |
|---|
| Width lower tolerance | -0,1mm |
|---|
| Width upper tolerance | 0,1mm |
|---|
