INA
| Średnica wewnętrzna d | 400mm |
|---|---|
| Średnica zewnętrzna D | 500mm |
| Masa | 23,221kg |
| Temperatura pracy | -30…80 °C |
| Basic dynamic load rating, radial (for radial load only) | 275 000N |
|---|---|
| Basic static load rating, radial (for radial load only) | 810 000N |
| Running accuracy, axial | 0,01mm |
| Basic dynamic load rating, axial | 385 000N |
| Basic static load rating, axial | 1 660 000N |
| Dimensions identical to ISO dimension series 18 | 61 880 |
| Inner diameter outer ring | 451mm |
| Bore diameter lower tolerance |
57 247,90 złnetto
+ VAT 23% = 70 414,92 zł brutto
Dobierz 9 szt., żeby zejść do 54 385,51 zł
| od 1 szt. | — | 57 247,90 zł |
| od 10 szt. | −5% | 54 385,51 zł |
| od 50 szt. | −8% | 52 668,07 zł |
| od 250 szt. | −12% | 50 378,15 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| -0,029mm |
| Bore diameter upper tolerance | 0,007mm |
|---|
| Rolling element pitch circle diameter | 450mm |
|---|
| Diameter of lubrication hole | 2,5mm |
|---|
| Height of the assembled bearing | 46mm |
|---|
| Height of individual ring | 46mm |
|---|
| Height inner ring | 46mm |
|---|
| Height of individual ring lower tolerance | -0,05mm |
|---|
| Height of individual ring upper tolerance | 0mm |
|---|
| Limiting speed for grease lubrication with normal clearance | 170 1/min |
|---|
| Limiting speed for oil lubrication with normal clearance | 340 1/min |
|---|
| Outer diameter inner ring | 449mm |
|---|
| Maximum axial tilting clearance, at standard bearing clearance | 0,1mm |
|---|
| Maximum radial bearing clearance, at standard bearing clearance | 0,05mm |
|---|
| Minimum axial tilting clearance, at standard bearing clearance | 0,02mm |
|---|
| Minimum radial bearing clearance, at standard bearing clearance | 0,01mm |
|---|
| Chamfer dimension | 2,1mm |
|---|
| Outside diameter lower tolerance | -0,04mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Running accuracy, radial | 0,03mm |
|---|
| Width lower tolerance | -0,15mm |
|---|
| Width upper tolerance | 0,15mm |
|---|
