INA
| Średnica wewnętrzna d | 120mm |
|---|---|
| Średnica zewnętrzna D | 210mm |
| Obciążenie dynamiczne C | 69 000N |
| Obciążenie statyczne C₀ | 124 000N |
| Prędkość graniczna | 900 1/min |
| Masa | 4,501kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 9 800N/µm |
|---|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 3µm |
| Axial rigidity of bearing position | 5 800N/µm |
| Basic dynamic load rating, axial | 112 000N |
| Basic static load rating, axial | 520 000N |
| Bearing friction torque at 5 1/min | 4Nm |
| Bore diameter lower tolerance | -0,01mm |
8954,60 złnetto
+ VAT 23% = 11 014,16 zł brutto
Dobierz 9 szt., żeby zejść do 8506,87 zł
| od 1 szt. | — | 8954,60 zł |
| od 10 szt. | −5% | 8506,87 zł |
| od 50 szt. | −8% | 8238,23 zł |
| od 250 szt. | −12% | 7880,05 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Bore diameter upper tolerance |
|---|
| 0mm |
| Counterbore depth of fixing holes | 6,2mm |
|---|
| Counterbore diameter of fixing holes | 11mm |
|---|
| Fixing holes diameter inner ring | 7mm |
|---|
| Fixing holes diameter outer ring | 7mm |
|---|
| Height contact face outer ring | 26mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,025mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,025mm |
|---|
| Height contact face outer ring | 14mm |
|---|
| Height contact face outerring H2 lower tolerance | -0,2mm |
|---|
| Height contact face outerring H2 upper tolerance | 0,2mm |
|---|
| Height | 40mm |
|---|
| Angular measuring system integrated | No |
|---|
| Marketing category | XL |
|---|
| Maximum diameter inner ring | 185mm |
|---|
| Outside diameter lower tolerance | -0,015mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch quantity | 24 |
|---|
| Pitch separation angle | 15° |
|---|
| Pitch circle diameter fixing holes in inner ring | 135mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 195mm |
|---|
| Quantity of fixing holes inner ring | 22 |
|---|
| Quantity of fixing holes outer ring | 21 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 3 |
|---|
| Radial rigidity of rolling element set | 5 600N/µm |
|---|
| Radial rigidity of bearing position | 3 640N/µm |
|---|
| Screw tightening torque | 14Nm |
|---|
| Threaded extraction hole | M8 |
|---|
| Tilting rigidity of rolling element set | 35 500Nm/mrad |
|---|
| Tilting rigidity of bearing position | 18 200Nm/mrad |
|---|
| Width of outer ring | 12mm |
|---|
