INA
| Średnica wewnętrzna d | 180mm |
|---|---|
| Średnica zewnętrzna D | 280mm |
| Obciążenie dynamiczne C | 100 000N |
| Obciążenie statyczne C₀ | 200 000N |
| Prędkość graniczna | 600 1/min |
| Masa | 6,95kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 13 500N/µm |
|---|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 4µm |
| Axial rigidity of bearing position | 9 400N/µm |
| Basic dynamic load rating, axial | 134 000N |
| Basic static load rating, axial | 730 000N |
| Bearing friction torque at 5 1/min | 5Nm |
| Bore diameter lower tolerance | -0,013mm |
15 607,10 złnetto
+ VAT 23% = 19 196,73 zł brutto
Dobierz 9 szt., żeby zejść do 14 826,75 zł
| od 1 szt. | — | 15 607,10 zł |
| od 10 szt. | −5% | 14 826,75 zł |
| od 50 szt. | −8% | 14 358,53 zł |
| od 250 szt. | −12% | 13 734,25 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Bore diameter upper tolerance |
|---|
| 0mm |
| Counterbore depth of fixing holes | 6,2mm |
|---|
| Counterbore diameter of fixing holes | 11mm |
|---|
| Fixing holes diameter inner ring | 7mm |
|---|
| Fixing holes diameter outer ring | 7mm |
|---|
| Height contact face outer ring | 29mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,03mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,03mm |
|---|
| Height contact face outer ring | 14mm |
|---|
| Height contact face outerring H2 lower tolerance | -0,025mm |
|---|
| Height contact face outerring H2 upper tolerance | 0,025mm |
|---|
| Height | 43mm |
|---|
| Angular measuring system integrated | No |
|---|
| Marketing category | XL |
|---|
| Maximum diameter inner ring | 245,1mm |
|---|
| Outside diameter lower tolerance | -0,018mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch quantity | 48 |
|---|
| Pitch separation angle | 7,5° |
|---|
| Pitch circle diameter fixing holes in inner ring | 194mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 260mm |
|---|
| Quantity of fixing holes inner ring | 46 |
|---|
| Quantity of fixing holes outer ring | 45 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 3 |
|---|
| Radial rigidity of rolling element set | 5 300N/µm |
|---|
| Radial rigidity of bearing position | 5 000N/µm |
|---|
| Screw tightening torque | 14Nm |
|---|
| Threaded extraction hole | M8 |
|---|
| Tilting rigidity of rolling element set | 88 500Nm/mrad |
|---|
| Tilting rigidity of bearing position | 46 000Nm/mrad |
|---|
| Width of outer ring | 15mm |
|---|
