INA
| Średnica wewnętrzna d | 325mm |
|---|---|
| Średnica zewnętrzna D | 450mm |
| Obciążenie dynamiczne C | 183 000N |
| Obciążenie statyczne C₀ | 530 000N |
| Prędkość graniczna | 200 1/min |
| Masa | 24,442kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 33 000N/µm |
|---|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 6µm |
| Axial rigidity of bearing position | 14 200N/µm |
| Basic dynamic load rating, axial | 247 000N |
| Basic static load rating, axial | 1 900 000N |
| Bearing friction torque at 5 1/min | 13Nm |
| Bore diameter lower tolerance | -0,023mm |
32 131,70 złnetto
+ VAT 23% = 39 521,99 zł brutto
Dobierz 9 szt., żeby zejść do 30 525,12 zł
| od 1 szt. | — | 32 131,70 zł |
| od 10 szt. | −5% | 30 525,12 zł |
| od 50 szt. | −8% | 29 561,16 zł |
| od 250 szt. | −12% | 28 275,90 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Bore diameter upper tolerance |
|---|
| 0mm |
| Counterbore depth of fixing holes | 8,2mm |
|---|
| Counterbore diameter of fixing holes | 15mm |
|---|
| Fixing holes diameter inner ring | 9,3mm |
|---|
| Fixing holes diameter outer ring | 9,3mm |
|---|
| Height contact face outer ring | 40mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,05mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,05mm |
|---|
| Height contact face outer ring | 20mm |
|---|
| Height contact face outerring H2 lower tolerance | -0,025mm |
|---|
| Height contact face outerring H2 upper tolerance | 0,025mm |
|---|
| Height | 60mm |
|---|
| Angular measuring system integrated | No |
|---|
| Marketing category | XL |
|---|
| Maximum diameter inner ring | 415,1mm |
|---|
| Outside diameter lower tolerance | -0,023mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch quantity | 36 |
|---|
| Pitch separation angle | 10° |
|---|
| Pitch circle diameter fixing holes in inner ring | 342mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 430mm |
|---|
| Quantity of fixing holes inner ring | 34 |
|---|
| Quantity of fixing holes outer ring | 33 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 3 |
|---|
| Radial rigidity of rolling element set | 9 900N/µm |
|---|
| Radial rigidity of bearing position | 8 800N/µm |
|---|
| Screw tightening torque | 34Nm |
|---|
| Threaded extraction hole | M12 |
|---|
| Tilting rigidity of rolling element set | 633 000Nm/mrad |
|---|
| Tilting rigidity of bearing position | 254 000Nm/mrad |
|---|
| Width of outer ring | 20mm |
|---|
