INA
| Średnica wewnętrzna d | 580mm |
|---|---|
| Średnica zewnętrzna D | 750mm |
| Obciążenie dynamiczne C | 255 000N |
| Obciążenie statyczne C₀ | 820 000N |
| Prędkość graniczna | 80 1/min |
| Masa | 85,2kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 41 800N/µm |
|---|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 10µm |
| Axial rigidity of bearing position | 23 800N/µm |
| Basic dynamic load rating, axial | 580 000N |
| Basic static load rating, axial | 4 450 000N |
| Bearing friction torque at 5 1/min | 60Nm |
| Bore diameter lower tolerance | -0,025mm |
72 777,60 złnetto
+ VAT 23% = 89 516,45 zł brutto
Dobierz 9 szt., żeby zejść do 69 138,72 zł
| od 1 szt. | — | 72 777,60 zł |
| od 10 szt. | −5% | 69 138,72 zł |
| od 50 szt. | −8% | 66 955,39 zł |
| od 250 szt. | −12% | 64 044,29 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Bore diameter upper tolerance |
|---|
| 0mm |
| Counterbore depth of fixing holes | 11mm |
|---|
| Counterbore diameter of fixing holes | 18mm |
|---|
| Fixing holes diameter inner ring | 11,4mm |
|---|
| Fixing holes diameter outer ring | 11,4mm |
|---|
| Height contact face outer ring | 60mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,25mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,25mm |
|---|
| Height contact face outer ring | 30mm |
|---|
| Height contact face outerring H2 lower tolerance | -0,25mm |
|---|
| Height contact face outerring H2 upper tolerance | 0,25mm |
|---|
| Height | 90mm |
|---|
| Angular measuring system integrated | No |
|---|
| Marketing category | XL |
|---|
| Maximum diameter inner ring | 700mm |
|---|
| Outside diameter lower tolerance | -0,035mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch quantity | 48 |
|---|
| Pitch separation angle | 7,5° |
|---|
| Pitch circle diameter fixing holes in inner ring | 610mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 720mm |
|---|
| Quantity of fixing holes inner ring | 46 |
|---|
| Quantity of fixing holes outer ring | 42 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 6 |
|---|
| Radial rigidity of rolling element set | 12 500N/µm |
|---|
| Radial rigidity of bearing position | 11 600N/µm |
|---|
| Screw tightening torque | 68Nm |
|---|
| Threaded extraction hole | M12 |
|---|
| Tilting rigidity of rolling element set | 1 960 000Nm/mrad |
|---|
| Tilting rigidity of bearing position | 1 176 000Nm/mrad |
|---|
| Width of outer ring | 30mm |
|---|
