INA
| Średnica wewnętrzna d | 850mm |
|---|---|
| Średnica zewnętrzna D | 1 095mm |
| Obciążenie dynamiczne C | 520 000N |
| Obciążenie statyczne C₀ | 1 690 000N |
| Prędkość graniczna | 50 1/min |
| Masa | 231,4kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 61 900N/µm |
|---|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 12µm |
| Axial rigidity of bearing position | 53 000N/µm |
| Basic dynamic load rating, axial | 1 020 000N |
| Basic static load rating, axial | 8 500 000N |
| Bearing friction torque at 5 1/min | 130Nm |
| Bore diameter lower tolerance | -0,05mm |
180 846,70 złnetto
+ VAT 23% = 222 441,44 zł brutto
Dobierz 9 szt., żeby zejść do 171 804,37 zł
| od 1 szt. | — | 180 846,70 zł |
| od 10 szt. | −5% | 171 804,37 zł |
| od 50 szt. | −8% | 166 378,96 zł |
| od 250 szt. | −12% | 159 145,10 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Bore diameter upper tolerance |
|---|
| 0mm |
| Counterbore depth of fixing holes | 17mm |
|---|
| Counterbore diameter of fixing holes | 26mm |
|---|
| Fixing holes diameter inner ring | 18mm |
|---|
| Fixing holes diameter outer ring | 18mm |
|---|
| Height contact face outer ring | 80,5mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,3mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,3mm |
|---|
| Height contact face outer ring | 43,5mm |
|---|
| Height contact face outerring H2 lower tolerance | -0,3mm |
|---|
| Height contact face outerring H2 upper tolerance | 0,3mm |
|---|
| Height | 124mm |
|---|
| Angular measuring system integrated | No |
|---|
| Marketing category | XL |
|---|
| Maximum diameter inner ring | 1 018mm |
|---|
| Outside diameter lower tolerance | -0,063mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch quantity | 60 |
|---|
| Pitch separation angle | 6° |
|---|
| Pitch circle diameter fixing holes in inner ring | 890mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 1 055mm |
|---|
| Quantity of fixing holes inner ring | 58 |
|---|
| Quantity of fixing holes outer ring | 54 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 6 |
|---|
| Radial rigidity of rolling element set | 12 000N/µm |
|---|
| Radial rigidity of bearing position | 16 700N/µm |
|---|
| Screw tightening torque | 284Nm |
|---|
| Threaded extraction hole | M16 |
|---|
| Tilting rigidity of rolling element set | 6 772 000Nm/mrad |
|---|
| Tilting rigidity of bearing position | 3 762 000Nm/mrad |
|---|
| Width of outer ring | 37mm |
|---|
