INA
| Średnica wewnętrzna d | 460mm |
|---|---|
| Średnica zewnętrzna D | 600mm |
| Obciążenie dynamiczne C | 168 000N |
| Obciążenie statyczne C₀ | 570 000N |
| Prędkość graniczna | 560 1/min |
| Masa | 44,715kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 25 400N/µm |
|---|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 6µm |
| Axial rigidity of bearing position | 16 000N/µm |
| Basic dynamic load rating, axial | 221 000N |
| Basic static load rating, axial | 1 690 000N |
| Bore diameter lower tolerance | -0,023mm |
| Bore diameter upper tolerance | 0mm |
68 237,10 złnetto
+ VAT 23% = 83 931,63 zł brutto
Dobierz 9 szt., żeby zejść do 64 825,25 zł
| od 1 szt. | — | 68 237,10 zł |
| od 10 szt. | −5% | 64 825,25 zł |
| od 50 szt. | −8% | 62 778,13 zł |
| od 250 szt. | −12% | 60 048,65 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Counterbore depth of fixing holes |
|---|
| 8,2mm |
| Counterbore diameter of fixing holes | 15mm |
|---|
| Fixing holes diameter inner ring | 9,3mm |
|---|
| Fixing holes diameter outer ring | 9,3mm |
|---|
| Height contact face outer ring | 46mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,08mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,07mm |
|---|
| Height contact face outer ring | 24mm |
|---|
| Height | 70mm |
|---|
| Height shaft washer | 19mm |
|---|
| Angular measuring system integrated | M |
|---|
| Mass moment of inertia for rotating inner ring | 15 738kg*cm² |
|---|
| Mass moment of inertia for rotating outer ring | 7 379kg*cm² |
|---|
| Maximum diameter inner ring | 560,9mm |
|---|
| Outside diameter lower tolerance | -0,028mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch quantity | 48 |
|---|
| Pitch separation angle | 7,5° |
|---|
| Pitch circle diameter fixing holes in inner ring | 482mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 580mm |
|---|
| Quantity of fixing holes inner ring | 46 |
|---|
| Quantity of fixing holes outer ring | 45 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 3 |
|---|
| Radial rigidity of rolling element set | 9 500N/µm |
|---|
| Radial rigidity of bearing position | 7 200N/µm |
|---|
| Diameter of dimensional scale on shaft locating washer | 557,6mm |
|---|
| Screw tightening torque | 34Nm |
|---|
| Threaded extraction hole | M12 |
|---|
| Tilting rigidity of rolling element set | 843 000Nm/mrad |
|---|
| Tilting rigidity of bearing position | 504 000Nm/mrad |
|---|
| Width of outer ring | 22mm |
|---|
