INA
| Średnica wewnętrzna d | 200mm |
|---|---|
| Średnica zewnętrzna D | 300mm |
| Obciążenie dynamiczne C | 94 000N |
| Obciążenie statyczne C₀ | 226 000N |
| Prędkość graniczna | 1 160 1/min |
| Masa | 10kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 13 600N/µm |
|---|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 4µm |
| Axial rigidity of bearing position | 7 200N/µm |
| Basic dynamic load rating, axial | 155 000N |
| Basic static load rating, axial | 840 000N |
| Bore diameter lower tolerance | -0,015mm |
| Bore diameter upper tolerance | 0mm |
41 801,50 złnetto
+ VAT 23% = 51 415,85 zł brutto
Dobierz 9 szt., żeby zejść do 39 711,43 zł
| od 1 szt. | — | 41 801,50 zł |
| od 10 szt. | −5% | 39 711,43 zł |
| od 50 szt. | −8% | 38 457,38 zł |
| od 250 szt. | −12% | 36 785,32 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Counterbore depth of fixing holes |
|---|
| 6,2mm |
| Counterbore diameter of fixing holes | 11mm |
|---|
| Fixing holes diameter inner ring | 7mm |
|---|
| Fixing holes diameter outer ring | 7mm |
|---|
| Height contact face outer ring | 30mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,06mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,04mm |
|---|
| Height contact face outer ring | 21mm |
|---|
| Height | 51mm |
|---|
| Angular measuring system integrated | MA |
|---|
| Mass moment of inertia for rotating inner ring | 667kg*cm² |
|---|
| Mass moment of inertia for rotating outer ring | 435kg*cm² |
|---|
| Maximum diameter inner ring | 274,4mm |
|---|
| Outside diameter lower tolerance | -0,018mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch quantity | 48 |
|---|
| Pitch separation angle | 7,5° |
|---|
| Pitch circle diameter fixing holes in inner ring | 215mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 285mm |
|---|
| Quantity of fixing holes inner ring | 46 |
|---|
| Quantity of fixing holes outer ring | 45 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 3 |
|---|
| Radial rigidity of rolling element set | 3 900N/µm |
|---|
| Radial rigidity of bearing position | 4 800N/µm |
|---|
| Screw tightening torque | 14Nm |
|---|
| Threaded extraction hole | M8 |
|---|
| Tilting rigidity of rolling element set | 101 000Nm/mrad |
|---|
| Tilting rigidity of bearing position | 52 200Nm/mrad |
|---|
| Width of outer ring | 15mm |
|---|
