INA
| Średnica wewnętrzna d | 20mm |
|---|---|
| Średnica zewnętrzna D | 68mm |
| Obciążenie dynamiczne C | 14 900N |
| Obciążenie statyczne C₀ | 22 400N |
| Masa | 0,495kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial | 33 500N |
| Basic static load rating, axial | 76 000N |
| Bearing friction torque | 0,5Nm |
| Diameter lubrication hole | 3,2mm |
| Distance to lubrication hole | 8mm |
| Division (screwing holes) | 45° |
| Fatigue load limit, axial | 6 400N |
2054,70 złnetto
+ VAT 23% = 2527,28 zł brutto
Dobierz 9 szt., żeby zejść do 1951,97 zł
| od 1 szt. | — | 2054,70 zł |
| od 10 szt. | −5% | 1951,97 zł |
| od 50 szt. | −8% | 1890,32 zł |
| od 250 szt. | −12% | 1808,14 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Fatigue load limit, radial |
|---|
| 3 400N |
| Height outer ring over wave washer | 29mm |
|---|
| Hight | 46mm |
|---|
| Limiting speed for grease lubrication | 2 000 1/min |
|---|
| Limiting speed for oil lubrication | 7 000 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA20/38 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM20 |
|---|
| Mass moment of inertia | 0,615kg*cm² |
|---|
| Maximum diameter of housing shoulder | 43mm |
|---|
| Minimum diameter shaft shoulder | 33mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screwing holes | 8 |
|---|
| Number of screws | 8 |
|---|
| Pitch circle diameter (holes) | 53mm |
|---|
| Position bore in the housing | 0,1mm |
|---|
| Required locknut force | 8 972N |
|---|
| Rigidity axial | 1 800N/µm |
|---|
| Rip diameter shaft washer | 42mm |
|---|
| Screw size | M6 |
|---|
| Split | 45° |
|---|
| Tightening torque nut | 18Nm |
|---|
| Tilting stiffness | 230Nm/mrad |
|---|
| Width inner ring | 10mm |
|---|
| Width, outer ring | 14mm |
|---|
