INA
| Średnica wewnętrzna d | 30mm |
|---|---|
| Średnica zewnętrzna D | 80mm |
| Obciążenie dynamiczne C | 24 300N |
| Obciążenie statyczne C₀ | 41 500N |
| Masa | 0,756kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial | 39 000N |
| Basic static load rating, axial | 101 000N |
| Bearing friction torque | 0,65Nm |
| Diameter lubrication hole | 3,2mm |
| Distance to lubrication hole | 10mm |
| Division (screwing holes) | 30° |
| Fatigue load limit, axial | 8 500N |
2452,40 złnetto
+ VAT 23% = 3016,45 zł brutto
Dobierz 9 szt., żeby zejść do 2329,78 zł
| od 1 szt. | — | 2452,40 zł |
| od 10 szt. | −5% | 2329,78 zł |
| od 50 szt. | −8% | 2256,21 zł |
| od 250 szt. | −12% | 2158,11 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Fatigue load limit, radial |
|---|
| 6 000N |
| Height outer ring over wave washer | 33mm |
|---|
| Hight | 50mm |
|---|
| Limiting speed for grease lubrication | 1 800 1/min |
|---|
| Limiting speed for oil lubrication | 5 500 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA30/52 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM30 |
|---|
| Mass moment of inertia | 1,46kg*cm² |
|---|
| Maximum diameter of housing shoulder | 53mm |
|---|
| Minimum diameter shaft shoulder | 44mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screwing holes | 12 |
|---|
| Number of screws | 12 |
|---|
| Pitch circle diameter (holes) | 63mm |
|---|
| Position bore in the housing | 0,1mm |
|---|
| Required locknut force | 10 662N |
|---|
| Rigidity axial | 2 200N/µm |
|---|
| Rip diameter shaft washer | 52mm |
|---|
| Screw size | M6 |
|---|
| Split | 30° |
|---|
| Tightening torque nut | 32Nm |
|---|
| Tilting stiffness | 520Nm/mrad |
|---|
| Width inner ring | 10mm |
|---|
| Width, outer ring | 18mm |
|---|
