INA
| Średnica wewnętrzna d | 50mm |
|---|---|
| Średnica zewnętrzna D | 115mm |
| Obciążenie dynamiczne C | 40 000N |
| Obciążenie statyczne C₀ | 82 000N |
| Masa | 1,861kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial | 90 000N |
| Basic static load rating, axial | 300 000N |
| Bearing friction torque | 2,2Nm |
| Diameter lubrication hole | 6mm |
| Distance to lubrication hole | 12,5mm |
| Division (screwing holes) | 30° |
| Fatigue load limit, axial | 28 000N |
4057,90 złnetto
+ VAT 23% = 4991,22 zł brutto
Dobierz 9 szt., żeby zejść do 3855,01 zł
| od 1 szt. | — | 4057,90 zł |
| od 10 szt. | −5% | 3855,01 zł |
| od 50 szt. | −8% | 3733,27 zł |
| od 250 szt. | −12% | 3570,95 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Fatigue load limit, radial |
|---|
| 11 500N |
| Height outer ring over wave washer | 40mm |
|---|
| Hight | 60mm |
|---|
| Limiting speed for grease lubrication | 1 200 1/min |
|---|
| Limiting speed for oil lubrication | 3 600 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA50/75 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM50 |
|---|
| Mass moment of inertia | 8,42kg*cm² |
|---|
| Maximum diameter of housing shoulder | 79mm |
|---|
| Minimum diameter shaft shoulder | 67mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screwing holes | 12 |
|---|
| Number of screws | 12 |
|---|
| Pitch circle diameter (holes) | 94mm |
|---|
| Position bore in the housing | 0,2mm |
|---|
| Required locknut force | 18 410N |
|---|
| Rigidity axial | 4 800N/µm |
|---|
| Rip diameter shaft washer | 78mm |
|---|
| Screw size | M8 |
|---|
| Split | 30° |
|---|
| Tightening torque nut | 85Nm |
|---|
| Tilting stiffness | 2 470Nm/mrad |
|---|
| Width inner ring | 11,5mm |
|---|
| Width, outer ring | 22,5mm |
|---|
