INA
| Średnica wewnętrzna d | 50mm |
|---|---|
| Średnica zewnętrzna D | 140mm |
| Obciążenie dynamiczne C | 46 500N |
| Obciążenie statyczne C₀ | 103 000N |
| Masa | 4,086kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial | 172 000N |
| Basic static load rating, axial | 480 000N |
| Bearing friction torque | 3,8Nm |
| Diameter lubrication hole | 6mm |
| Distance to lubrication hole | 12,5mm |
| Division (screwing holes) | 30° |
| Fatigue load limit, axial | 44 500N |
5869,40 złnetto
+ VAT 23% = 7219,36 zł brutto
Dobierz 9 szt., żeby zejść do 5575,93 zł
| od 1 szt. | — | 5869,40 zł |
| od 10 szt. | −5% | 5575,93 zł |
| od 50 szt. | −8% | 5399,85 zł |
| od 250 szt. | −12% | 5165,07 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Fatigue load limit, radial |
|---|
| 12 700N |
| Height outer ring over wave washer | 51mm |
|---|
| Hight | 82mm |
|---|
| Limiting speed for grease lubrication | 1 100 1/min |
|---|
| Limiting speed for oil lubrication | 3 100 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA50/92 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM50 |
|---|
| Mass moment of inertia | 29,8kg*cm² |
|---|
| Maximum diameter of housing shoulder | 96mm |
|---|
| Minimum diameter shaft shoulder | 75mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screwing holes | 12 |
|---|
| Number of screws | 12 |
|---|
| Pitch circle diameter (holes) | 113mm |
|---|
| Position bore in the housing | 0,2mm |
|---|
| Required locknut force | 36 224N |
|---|
| Rigidity axial | 4 600N/µm |
|---|
| Rip diameter shaft washer | 95mm |
|---|
| Screw size | M10 |
|---|
| Split | 30° |
|---|
| Tightening torque nut | 180Nm |
|---|
| Tilting stiffness | 2 900Nm/mrad |
|---|
| Width inner ring | 17,5mm |
|---|
| Width, outer ring | 22,5mm |
|---|
