INA
| Średnica wewnętrzna d | 55mm |
|---|---|
| Średnica zewnętrzna D | 145mm |
| Obciążenie dynamiczne C | 44 000N |
| Obciążenie statyczne C₀ | 98 000N |
| Masa | 4,086kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial | 177 000N |
| Basic static load rating, axial | 500 000N |
| Bearing friction torque | 4Nm |
| Diameter lubrication hole | 6mm |
| Distance to lubrication hole | 12,5mm |
| Division (screwing holes) | 30° |
| Fatigue load limit, axial | 46 500N |
6245,00 złnetto
+ VAT 23% = 7681,35 zł brutto
Dobierz 9 szt., żeby zejść do 5932,75 zł
| od 1 szt. | — | 6245,00 zł |
| od 10 szt. | −5% | 5932,75 zł |
| od 50 szt. | −8% | 5745,40 zł |
| od 250 szt. | −12% | 5495,60 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Fatigue load limit, radial |
|---|
| 13 800N |
| Height outer ring over wave washer | 51mm |
|---|
| Hight | 82mm |
|---|
| Limiting speed for grease lubrication | 1 000 1/min |
|---|
| Limiting speed for oil lubrication | 2 900 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA55/98 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM55 |
|---|
| Mass moment of inertia | 36,1kg*cm² |
|---|
| Maximum diameter of housing shoulder | 101mm |
|---|
| Minimum diameter shaft shoulder | 85mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screwing holes | 12 |
|---|
| Number of screws | 12 |
|---|
| Pitch circle diameter (holes) | 118mm |
|---|
| Position bore in the housing | 0,2mm |
|---|
| Required locknut force | 39 807N |
|---|
| Rigidity axial | 4 900N/µm |
|---|
| Rip diameter shaft washer | 100mm |
|---|
| Screw size | M10 |
|---|
| Split | 30° |
|---|
| Tightening torque nut | 220Nm |
|---|
| Tilting stiffness | 3 600Nm/mrad |
|---|
| Width inner ring | 17,5mm |
|---|
| Width, outer ring | 22,5mm |
|---|
