INA
| Średnica wewnętrzna d | 20mm |
|---|---|
| Średnica zewnętrzna D | 52mm |
| Obciążenie dynamiczne C | 14 900N |
| Obciążenie statyczne C₀ | 22 400N |
| Masa | 0,45kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial | 33 500N |
| Basic static load rating, axial | 76 000N |
| Bearing friction torque | 0,5Nm |
| Fatigue load limit, axial | 6 400N |
| Fatigue load limit, radial | 3 400N |
| Heeldiameter wave washer long | 42mm |
| Height outer ring over wave washer | 45mm |
1911,10 złnetto
+ VAT 23% = 2350,65 zł brutto
Dobierz 9 szt., żeby zejść do 1815,55 zł
| od 1 szt. | — | 1911,10 zł |
| od 10 szt. | −5% | 1815,55 zł |
| od 50 szt. | −8% | 1758,21 zł |
| od 250 szt. | −12% | 1681,77 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Hight |
|---|
| 60mm |
| Limiting speed for grease lubrication | 2 000 1/min |
|---|
| Limiting speed for oil lubrication | 7 000 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA20/38 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM20 |
|---|
| Mass moment of inertia | 0,683kg*cm² |
|---|
| Maximum diameter of housing shoulder | 43mm |
|---|
| Minimum diameter shaft shoulder | 28mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Outside diameter wave washer long | 30mm |
|---|
| Required locknut force | 8 972N |
|---|
| Rigidity axial | 1 800N/µm |
|---|
| Rip diameter shaft washer | 42mm |
|---|
| Rotary shaft seal to DIN 3760 (not included) | 30X42X7 |
|---|
| Tightening torque nut | 18Nm |
|---|
| Tilting stiffness | 230Nm/mrad |
|---|
| Width heel wave washer long | 12mm |
|---|
| Width, inner ring | 10mm |
|---|
| Width, outer ring | 16mm |
|---|
| Width wave washer long | 24mm |
|---|
| Type of wave washer | L |
|---|
