INA
| Średnica wewnętrzna d | 25mm |
|---|---|
| Średnica zewnętrzna D | 57mm |
| Obciążenie dynamiczne C | 22 600N |
| Obciążenie statyczne C₀ | 36 000N |
| Masa | 0,565kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial | 35 500N |
| Basic static load rating, axial | 86 000N |
| Bearing friction torque | 0,55Nm |
| Fatigue load limit, axial | 7 300N |
| Fatigue load limit, radial | 5 200N |
| Height outer ring over wave washer | 35mm |
| Hight | 50mm |
1995,80 złnetto
+ VAT 23% = 2454,83 zł brutto
Dobierz 9 szt., żeby zejść do 1896,01 zł
| od 1 szt. | — | 1995,80 zł |
| od 10 szt. | −5% | 1896,01 zł |
| od 50 szt. | −8% | 1836,14 zł |
| od 250 szt. | −12% | 1756,30 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Limiting speed for grease lubrication |
|---|
| 1 900 1/min |
| Limiting speed for oil lubrication | 6 000 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA25/45 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM25 |
|---|
| Mass moment of inertia | 0,989kg*cm² |
|---|
| Maximum diameter of housing shoulder | 48mm |
|---|
| Minimum diameter shaft shoulder | 39mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Preload force axial | 9 745N |
|---|
| Rigidity axial | 1 900N/µm |
|---|
| Rip diameter shaft washer | 47mm |
|---|
| Tightening torque nut | 25Nm |
|---|
| Tilting stiffness | 350Nm/mrad |
|---|
| Width, inner ring | 10mm |
|---|
| Width, outer ring | 20mm |
|---|
