INA
| Średnica wewnętrzna d | 25mm |
|---|---|
| Średnica zewnętrzna D | 72mm |
| Obciążenie dynamiczne C | 24 300N |
| Obciążenie statyczne C₀ | 41 500N |
| Masa | 1,205kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial | 80 000N |
| Basic static load rating, axial | 199 000N |
| Bearing friction torque | 1,6Nm |
| Fatigue load limit, axial | 18 600N |
| Fatigue load limit, radial | 6 000N |
| Height outer ring over wave washer | 40mm |
| Hight | 60mm |
2761,70 złnetto
+ VAT 23% = 3396,89 zł brutto
Dobierz 9 szt., żeby zejść do 2623,62 zł
| od 1 szt. | — | 2761,70 zł |
| od 10 szt. | −5% | 2623,62 zł |
| od 50 szt. | −8% | 2540,76 zł |
| od 250 szt. | −12% | 2430,30 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Limiting speed for grease lubrication |
|---|
| 1 400 1/min |
| Limiting speed for oil lubrication | 4 900 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA25/58 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM25 |
|---|
| Mass moment of inertia | 3,88kg*cm² |
|---|
| Maximum diameter of housing shoulder | 63mm |
|---|
| Minimum diameter shaft shoulder | 45mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Preload force axial | 20 790N |
|---|
| Rigidity axial | 3 000N/µm |
|---|
| Rip diameter shaft washer | 62mm |
|---|
| Tightening torque nut | 55Nm |
|---|
| Tilting stiffness | 800Nm/mrad |
|---|
| Width, inner ring | 12,5mm |
|---|
| Width, outer ring | 20mm |
|---|
