INA
| Średnica wewnętrzna d | 30mm |
|---|---|
| Średnica zewnętrzna D | 80mm |
| Obciążenie dynamiczne C | 26 000N |
| Obciążenie statyczne C₀ | 47 000N |
| Masa | 1,53kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial | 107 000N |
| Basic static load rating, axial | 265 000N |
| Bearing friction torque | 2,1Nm |
| Fatigue load limit, axial | 22 900N |
| Fatigue load limit, radial | 6 800N |
| Height outer ring over wave washer | 43mm |
| Hight | 66mm |
3196,20 złnetto
+ VAT 23% = 3931,33 zł brutto
Dobierz 9 szt., żeby zejść do 3036,39 zł
| od 1 szt. | — | 3196,20 zł |
| od 10 szt. | −5% | 3036,39 zł |
| od 50 szt. | −8% | 2940,50 zł |
| od 250 szt. | −12% | 2812,66 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Limiting speed for grease lubrication |
|---|
| 1 300 1/min |
| Limiting speed for oil lubrication | 4 400 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA30/65 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM30 |
|---|
| Mass moment of inertia | 6,53kg*cm² |
|---|
| Maximum diameter of housing shoulder | 69mm |
|---|
| Minimum diameter shaft shoulder | 52mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Preload force axial | 24 287N |
|---|
| Rigidity axial | 3 300N/µm |
|---|
| Rip diameter shaft washer | 68mm |
|---|
| Tightening torque nut | 75Nm |
|---|
| Tilting stiffness | 1 100Nm/mrad |
|---|
| Width, inner ring | 14mm |
|---|
| Width, outer ring | 20mm |
|---|
