INA
| Średnica wewnętrzna d | 35mm |
|---|---|
| Średnica zewnętrzna D | 70mm |
| Obciążenie dynamiczne C | 26 000N |
| Obciążenie statyczne C₀ | 47 000N |
| Masa | 0,871kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial | 56 000N |
| Basic static load rating, axial | 148 000N |
| Bearing friction torque | 0,9Nm |
| Fatigue load limit, axial | 12 900N |
| Fatigue load limit, radial | 6 800N |
| Height outer ring over wave washer | 37mm |
| Hight | 54mm |
2386,10 złnetto
+ VAT 23% = 2934,90 zł brutto
Dobierz 9 szt., żeby zejść do 2266,80 zł
| od 1 szt. | — | 2386,10 zł |
| od 10 szt. | −5% | 2266,80 zł |
| od 50 szt. | −8% | 2195,21 zł |
| od 250 szt. | −12% | 2099,77 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Limiting speed for grease lubrication |
|---|
| 1 700 1/min |
| Limiting speed for oil lubrication | 4 800 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA35/58 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM35/58 |
|---|
| Mass moment of inertia | 2,8kg*cm² |
|---|
| Maximum diameter of housing shoulder | 61mm |
|---|
| Minimum diameter shaft shoulder | 50mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Preload force axial | 12 143N |
|---|
| Rigidity axial | 2 600N/µm |
|---|
| Rip diameter shaft washer | 60mm |
|---|
| Tightening torque nut | 40Nm |
|---|
| Tilting stiffness | 740Nm/mrad |
|---|
| Width, inner ring | 11mm |
|---|
| Width, outer ring | 20mm |
|---|
