INA
| Średnica wewnętrzna d | 40mm |
|---|---|
| Średnica zewnętrzna D | 75mm |
| Obciążenie dynamiczne C | 27 500N |
| Obciążenie statyczne C₀ | 53 000N |
| Masa | 0,979kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial | 59 000N |
| Basic static load rating, axial | 163 000N |
| Bearing friction torque | 1Nm |
| Fatigue load limit, axial | 14 200N |
| Fatigue load limit, radial | 7 600N |
| Heeldiameter wave washer long | 50mm |
| Height outer ring over wave washer | 53mm |
2949,50 złnetto
+ VAT 23% = 3627,89 zł brutto
Dobierz 9 szt., żeby zejść do 2802,03 zł
| od 1 szt. | — | 2949,50 zł |
| od 10 szt. | −5% | 2802,03 zł |
| od 50 szt. | −8% | 2713,54 zł |
| od 250 szt. | −12% | 2595,56 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Hight |
|---|
| 70mm |
| Limiting speed for grease lubrication | 1 600 1/min |
|---|
| Limiting speed for oil lubrication | 4 400 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA40/62 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM40 |
|---|
| Mass moment of inertia | 4,35kg*cm² |
|---|
| Maximum diameter of housing shoulder | 66mm |
|---|
| Minimum diameter shaft shoulder | 48mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Outside diameter wave washer long | 63mm |
|---|
| Required locknut force | 14 240N |
|---|
| Rigidity axial | 2 800N/µm |
|---|
| Rip diameter shaft washer | 65mm |
|---|
| Rotary shaft seal to DIN 3760 (not included) | 50X65X8 |
|---|
| Tightening torque nut | 55Nm |
|---|
| Tilting stiffness | 1 030Nm/mrad |
|---|
| Width heel wave washer long | 14mm |
|---|
| Width, inner ring | 11mm |
|---|
| Width, outer ring | 20mm |
|---|
| Width wave washer long | 27mm |
|---|
| Type of wave washer | L |
|---|
