INA
| Średnica wewnętrzna d | 45mm |
|---|---|
| Średnica zewnętrzna D | 105mm |
| Obciążenie dynamiczne C | 40 000N |
| Obciążenie statyczne C₀ | 82 000N |
| Masa | 3,034kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial | 154 000N |
| Basic static load rating, axial | 405 000N |
| Bearing friction torque | 3,5Nm |
| Fatigue load limit, axial | 37 500N |
| Fatigue load limit, radial | 11 500N |
| Height outer ring over wave washer | 53,5mm |
| Hight | 82mm |
4628,60 złnetto
+ VAT 23% = 5693,18 zł brutto
Dobierz 9 szt., żeby zejść do 4397,17 zł
| od 1 szt. | — | 4628,60 zł |
| od 10 szt. | −5% | 4397,17 zł |
| od 50 szt. | −8% | 4258,31 zł |
| od 250 szt. | −12% | 4073,17 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Limiting speed for grease lubrication |
|---|
| 1 150 1/min |
| Limiting speed for oil lubrication | 3 300 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA45/85 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM45 |
|---|
| Mass moment of inertia | 23,7kg*cm² |
|---|
| Maximum diameter of housing shoulder | 91mm |
|---|
| Minimum diameter shaft shoulder | 70mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Preload force axial | 33 549N |
|---|
| Rigidity axial | 4 000N/µm |
|---|
| Rip diameter shaft washer | 90mm |
|---|
| Tightening torque nut | 150Nm |
|---|
| Tilting stiffness | 2 100Nm/mrad |
|---|
| Width, inner ring | 17,5mm |
|---|
| Width, outer ring | 25mm |
|---|
