INA
| Średnica wewnętrzna d | 60mm |
|---|---|
| Średnica zewnętrzna D | 120mm |
| Obciążenie dynamiczne C | 44 500N |
| Obciążenie statyczne C₀ | 92 000N |
| Masa | 3,77kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial | 187 000N |
| Basic static load rating, axial | 550 000N |
| Bearing friction torque | 4,2Nm |
| Fatigue load limit, axial | 51 000N |
| Fatigue load limit, radial | 12 900N |
| Height outer ring over wave washer | 53,5mm |
| Hight | 82mm |
7482,30 złnetto
+ VAT 23% = 9203,23 zł brutto
Dobierz 9 szt., żeby zejść do 7108,19 zł
| od 1 szt. | — | 7482,30 zł |
| od 10 szt. | −5% | 7108,19 zł |
| od 50 szt. | −8% | 6883,72 zł |
| od 250 szt. | −12% | 6584,42 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Limiting speed for grease lubrication |
|---|
| 950 1/min |
| Limiting speed for oil lubrication | 2 700 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA60/98 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM60 |
|---|
| Mass moment of inertia | 43,8kg*cm² |
|---|
| Maximum diameter of housing shoulder | 106mm |
|---|
| Minimum diameter shaft shoulder | 90mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Preload force axial | 41 144N |
|---|
| Rigidity axial | 5 300N/µm |
|---|
| Rip diameter shaft washer | 105mm |
|---|
| Tightening torque nut | 250Nm |
|---|
| Tilting stiffness | 4 300Nm/mrad |
|---|
| Width, inner ring | 17,5mm |
|---|
| Width, outer ring | 25mm |
|---|
