INA
| Średnica wewnętrzna d | 70mm |
|---|---|
| Średnica zewnętrzna D | 130mm |
| Obciążenie dynamiczne C | 56 000N |
| Obciążenie statyczne C₀ | 119 000N |
| Masa | 4,124kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial | 201 000N |
| Basic static load rating, axial | 630 000N |
| Bearing friction torque | 4,8Nm |
| Fatigue load limit, axial | 58 000N |
| Fatigue load limit, radial | 16 100N |
| Height outer ring over wave washer | 53,5mm |
| Hight | 82mm |
8980,90 złnetto
+ VAT 23% = 11 046,51 zł brutto
Dobierz 9 szt., żeby zejść do 8531,86 zł
| od 1 szt. | — | 8980,90 zł |
| od 10 szt. | −5% | 8531,86 zł |
| od 50 szt. | −8% | 8262,43 zł |
| od 250 szt. | −12% | 7903,19 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Limiting speed for grease lubrication |
|---|
| 800 1/min |
| Limiting speed for oil lubrication | 2 400 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA70/110 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM70 |
|---|
| Mass moment of inertia | 62,2kg*cm² |
|---|
| Maximum diameter of housing shoulder | 116mm |
|---|
| Minimum diameter shaft shoulder | 100mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Preload force axial | 46 786N |
|---|
| Rigidity axial | 5 800N/µm |
|---|
| Rip diameter shaft washer | 115mm |
|---|
| Tightening torque nut | 330Nm |
|---|
| Tilting stiffness | 6 000Nm/mrad |
|---|
| Width, inner ring | 17,5mm |
|---|
| Width, outer ring | 25mm |
|---|
