INA
| Średnica wewnętrzna d | 100mm |
|---|---|
| Prędkość graniczna | 5 000 1/min |
| Masa | 3,84kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 2 200N/µm |
|---|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 3µm |
| Axial rigidity of bearing position | 1 200N/µm |
| Basic dynamic load rating, axial | 71 000N |
| Basic static load rating, axial | 265 000N |
| Bore diameter lower tolerance | -0,01mm |
| Bore diameter upper tolerance | 0mm |
9685,00 złnetto
+ VAT 23% = 11 912,55 zł brutto
Dobierz 9 szt., żeby zejść do 9200,75 zł
| od 1 szt. | — | 9685,00 zł |
| od 10 szt. | −5% | 9200,75 zł |
| od 50 szt. | −8% | 8910,20 zł |
| od 250 szt. | −12% | 8522,80 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Counterbore depth of fixing holes |
|---|
| 5,4mm |
| Counterbore diameter of fixing holes | 10mm |
|---|
| Fatigue load limit, axial | 10 300N |
|---|
| Fixing holes diameter inner ring | 5,6mm |
|---|
| Fixing holes diameter outer ring | 5,6mm |
|---|
| Flange diameter | 185mm |
|---|
| Flange diameter lower tolerance | -0,015mm |
|---|
| Flange diameter upper tolerance | 0mm |
|---|
| Height contact face outer ring | 25mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,175mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,175mm |
|---|
| Height | 38mm |
|---|
| Outside diameter D1 | 161mm |
|---|
| Outside diameter D3 | 158mm |
|---|
| Pitch quantity | 18 |
|---|
| Pitch separation angle | 20° |
|---|
| Pitch circle diameter fixing holes in inner ring | 112mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 170mm |
|---|
| Quantity of fixing holes inner ring | 16 |
|---|
| Quantity of fixing holes outer ring | 15 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 3 |
|---|
| Radial rigidity of rolling element set | 350N/µm |
|---|
| Radial rigidity of bearing position | 350N/µm |
|---|
| Rib diameter inner ring | 136mm |
|---|
| Screw tightening torque | 8,5Nm |
|---|
| Threaded extraction hole | M5 |
|---|
| Tilting rigidity of rolling element set | 5 000Nm/mrad |
|---|
| Tilting rigidity of bearing position | 3 600Nm/mrad |
|---|
| Generation | B |
|---|
