INA
| Średnica wewnętrzna d | 120mm |
|---|---|
| Prędkość graniczna | 4 300 1/min |
| Masa | 4,81kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 2 500N/µm |
|---|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 3µm |
| Axial rigidity of bearing position | 1 500N/µm |
| Basic dynamic load rating, axial | 76 000N |
| Basic static load rating, axial | 315 000N |
| Bore diameter lower tolerance | -0,01mm |
| Bore diameter upper tolerance | 0mm |
10 741,00 złnetto
+ VAT 23% = 13 211,43 zł brutto
Dobierz 9 szt., żeby zejść do 10 203,95 zł
| od 1 szt. | — | 10 741,00 zł |
| od 10 szt. | −5% | 10 203,95 zł |
| od 50 szt. | −8% | 9881,72 zł |
| od 250 szt. | −12% | 9452,08 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Counterbore depth of fixing holes |
|---|
| 6,2mm |
| Counterbore diameter of fixing holes | 11mm |
|---|
| Fatigue load limit, axial | 11 500N |
|---|
| Fixing holes diameter inner ring | 7mm |
|---|
| Fixing holes diameter outer ring | 7mm |
|---|
| Flange diameter | 210mm |
|---|
| Flange diameter lower tolerance | -0,015mm |
|---|
| Flange diameter upper tolerance | 0mm |
|---|
| Height contact face outer ring | 26mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,175mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,175mm |
|---|
| Height | 40mm |
|---|
| Outside diameter D1 | 185mm |
|---|
| Outside diameter D3 | 181mm |
|---|
| Pitch quantity | 24 |
|---|
| Pitch separation angle | 15° |
|---|
| Pitch circle diameter fixing holes in inner ring | 135mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 195mm |
|---|
| Quantity of fixing holes inner ring | 22 |
|---|
| Quantity of fixing holes outer ring | 21 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 3 |
|---|
| Radial rigidity of rolling element set | 400N/µm |
|---|
| Radial rigidity of bearing position | 400N/µm |
|---|
| Rib diameter inner ring | 159mm |
|---|
| Screw tightening torque | 14Nm |
|---|
| Threaded extraction hole | M8 |
|---|
| Tilting rigidity of rolling element set | 8 000Nm/mrad |
|---|
| Tilting rigidity of bearing position | 5 500Nm/mrad |
|---|
| Generation | B |
|---|
