INA
| Średnica wewnętrzna d | 180mm |
|---|---|
| Prędkość graniczna | 3 500 1/min |
| Masa | 7,7kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 2 800N/µm |
|---|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 4µm |
| Axial rigidity of bearing position | 1 900N/µm |
| Basic dynamic load rating, axial | 85 000N |
| Basic static load rating, axial | 440 000N |
| Bore diameter lower tolerance | -0,013mm |
| Bore diameter upper tolerance | 0mm |
19 766,20 złnetto
+ VAT 23% = 24 312,43 zł brutto
Dobierz 9 szt., żeby zejść do 18 777,89 zł
| od 1 szt. | — | 19 766,20 zł |
| od 10 szt. | −5% | 18 777,89 zł |
| od 50 szt. | −8% | 18 184,90 zł |
| od 250 szt. | −12% | 17 394,26 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Counterbore depth of fixing holes |
|---|
| 6,2mm |
| Counterbore diameter of fixing holes | 11mm |
|---|
| Fatigue load limit, axial | 13 500N |
|---|
| Fixing holes diameter inner ring | 7mm |
|---|
| Fixing holes diameter outer ring | 7mm |
|---|
| Flange diameter | 280mm |
|---|
| Flange diameter lower tolerance | -0,018mm |
|---|
| Flange diameter upper tolerance | 0mm |
|---|
| Height contact face outer ring | 29mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,175mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,175mm |
|---|
| Height | 43mm |
|---|
| Outside diameter D1 | 244mm |
|---|
| Outside diameter D3 | 246mm |
|---|
| Pitch quantity | 48 |
|---|
| Pitch separation angle | 7,5° |
|---|
| Pitch circle diameter fixing holes in inner ring | 194mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 260mm |
|---|
| Quantity of fixing holes inner ring | 46 |
|---|
| Quantity of fixing holes outer ring | 45 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 3 |
|---|
| Radial rigidity of rolling element set | 500N/µm |
|---|
| Radial rigidity of bearing position | 500N/µm |
|---|
| Rib diameter inner ring | 219mm |
|---|
| Screw tightening torque | 14Nm |
|---|
| Threaded extraction hole | M8 |
|---|
| Tilting rigidity of rolling element set | 16 000Nm/mrad |
|---|
| Tilting rigidity of bearing position | 10 700Nm/mrad |
|---|
| Generation | B |
|---|
