INA
| Średnica wewnętrzna d | 460mm |
|---|---|
| Prędkość graniczna | 1 400 1/min |
| Masa | 46,2kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 7 100N/µm |
|---|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 6µm |
| Axial rigidity of bearing position | 5 300N/µm |
| Basic dynamic load rating, axial | 255 000N |
| Basic static load rating, axial | 1 860 000N |
| Bore diameter lower tolerance | -0,023mm |
| Bore diameter upper tolerance | 0mm |
61 631,90 złnetto
+ VAT 23% = 75 807,24 zł brutto
Dobierz 9 szt., żeby zejść do 58 550,31 zł
| od 1 szt. | — | 61 631,90 zł |
| od 10 szt. | −5% | 58 550,31 zł |
| od 50 szt. | −8% | 56 701,35 zł |
| od 250 szt. | −12% | 54 236,07 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Counterbore depth of fixing holes |
|---|
| 8,2mm |
| Counterbore diameter of fixing holes | 15mm |
|---|
| Fatigue load limit, axial | 37 000N |
|---|
| Fixing holes diameter inner ring | 9,3mm |
|---|
| Fixing holes diameter outer ring | 9,3mm |
|---|
| Flange diameter | 600mm |
|---|
| Flange diameter lower tolerance | -0,028mm |
|---|
| Flange diameter upper tolerance | 0mm |
|---|
| Height contact face outer ring | 46mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,225mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,225mm |
|---|
| Height | 70mm |
|---|
| Outside diameter D1 | 560mm |
|---|
| Outside diameter D3 | 563mm |
|---|
| Pitch quantity | 48 |
|---|
| Pitch separation angle | 7,5° |
|---|
| Pitch circle diameter fixing holes in inner ring | 482mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 580mm |
|---|
| Quantity of fixing holes inner ring | 46 |
|---|
| Quantity of fixing holes outer ring | 45 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 3 |
|---|
| Radial rigidity of rolling element set | 1 100N/µm |
|---|
| Radial rigidity of bearing position | 1 100N/µm |
|---|
| Rib diameter inner ring | 520mm |
|---|
| Screw tightening torque | 34Nm |
|---|
| Threaded extraction hole | M12 |
|---|
| Tilting rigidity of rolling element set | 223 000Nm/mrad |
|---|
| Tilting rigidity of bearing position | 175 000Nm/mrad |
|---|
| Generation | B |
|---|
