INA
| Średnica wewnętrzna d | 100mm |
|---|---|
| Średnica zewnętrzna D | 200mm |
| Szerokość B | 55mm |
| Masa | 8,372kg |
| Temperatura pracy | -30…120 °C |
| Axial runout | 3µm |
|---|---|
| Basic dynamic load rating, axial | 154 000N |
| Basic static load rating, axial | 435 000N |
| Bearing frictional torque | 2,6Nm |
| Bore diameter lower tolerance | -0,008mm |
| Bore diameter upper tolerance | 0mm |
| Connection thread for lubrication | M6 |
| Contact angle | 60° |
15 980,70 złnetto
+ VAT 23% = 19 656,26 zł brutto
Dobierz 9 szt., żeby zejść do 15 181,67 zł
| od 1 szt. | — | 15 980,70 zł |
| od 10 szt. | −5% | 15 181,67 zł |
| od 50 szt. | −8% | 14 702,24 zł |
| od 250 szt. | −12% | 14 063,02 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Distance of extraction slot |
|---|
| 45mm |
| Fatigue load limit, axial | 23 000N |
|---|
| Fixing holes diameter | 11mm |
|---|
| Limiting speed for grease lubrication | 3 300 1/min |
|---|
| Marketing category | XL |
|---|
| Mass moment of inertia | 85,3kg*cm² |
|---|
| Maximum diameter of housing | 150mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum diameter shaft | 128mm |
|---|
| Number of holes in adjacent construction | 8 |
|---|
| Outside diameter lower tolerance | -0,015mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch circle diameter fixing holes | 175mm |
|---|
| Pitch quantity of fixing holes | 8 |
|---|
| Pitch separation angle of holes in adjacent construction | 45° |
|---|
| Pitch separation angle of fixing holes | 45° |
|---|
| Position tolerance of bore in the housing | 0,2mm |
|---|
| Recommended INA precision locknut for axial locking | AM100 |
|---|
| Recommended INA precision locknut for radial locking | ZMA100/140 |
|---|
| Required locknut force axial | 25 624N |
|---|
| Rib diameter inner ring | 132mm |
|---|
| Rigidity axial | 1 900N/µm |
|---|
| Size of fixing screws | M10 |
|---|
| Thermally safe operating speed | 2 150 1/min |
|---|
| Tightening torque for the recommended INA precision locknut | 250Nm |
|---|
| Tilting rigidity | 5 800Nm/mrad |
|---|
| Tolerance class | Standard |
|---|
| Width lower tolerance | -0,25mm |
|---|
| Width of extraction slot | 3mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Sealing | 2Z |
|---|
