4271,05 zł
Axial angular contact ball bearings ZKLF..-2RS-2AP-XL, matched pair, double direction, lip seals on both sides
| Class description short | Axial angular contact ball bearing |
| Mass netto | 1.14 kg |
| Width | 56.0 mm |
| Operating temperature min. | -30.0 °C |
| Operating temperature max. | 120.0 °C |
| REACH | REACH_YES_597-82-0! |
| RoHS | RoHS compliant |
| Axial runout | 2.0 µm |
| Basic dynamic load rating, axial | 46000.0 N |
| Basic static load rating, axial | 94000.0 N |
| Bearing frictional torque | 0.45 Nm |
| Bore diameter | 20.0 mm |
| Bore diameter lower tolerance | -0.005 mm |
| Bore diameter upper tolerance | 0.0 mm |
| Brand | INA |
| Connection thread for lubrication | M6 |
| Contact angle | 60.0 ° |
| Distance of extraction slot | 47.0 mm |
| Fatigue load limit, axial | 5700.0 N |
| Fixing holes diameter | 6.8 mm |
| Limiting speed for grease lubrication | 6600.0 1/min |
| Marketing category | XL |
| Mass moment of inertia | 0.564 kg*cm² |
| Maximum diameter of housing | 43.0 mm |
| Minimum chamfer dimension | 0.6 mm |
| Minimum chamfer dimension | 0.3 mm |
| Minimum diameter shaft | 25.0 mm |
| Number of holes in adjacent construction | 7.0 |
| Outside diameter | 68.0 mm |
| Outside diameter lower tolerance | -0.01 mm |
| Outside diameter upper tolerance | 0.0 mm |
| PFAS | nein |
| Pitch circle diameter fixing holes | 53.0 mm |
| Pitch quantity of fixing holes | 7.0 |
| Pitch separation angle of holes in adjacent construction | 45.0 ° |
| Pitch separation angle of fixing holes | 45.0 ° |
| Position tolerance of bore in the housing | 0.1 mm |
| Recommended INA precision locknut for axial locking | AM20 |
| Recommended INA precision locknut for radial locking | ZMA20/38 |
| Required locknut force axial | 8258.0 N |
| Rib diameter inner ring | 34.5 mm |
| Rigidity axial | 1150.0 N/µm |
| Size of fixing screws | M6X70 |
| Thermally safe operating speed | 3000.0 1/min |
| Tightening torque for the recommended INA precision locknut | 18.0 Nm |
| Tilting rigidity | 320.0 Nm/mrad |
| Tolerance class | Standard |
| Width lower tolerance | -0.5 mm |
| Width of extraction slot | 3.0 mm |
| Width upper tolerance | 0.0 mm |
| Number of bearings | 2AP |
| Sealing | 2RS |
