INA
| Średnica wewnętrzna d | 60mm |
|---|---|
| Średnica zewnętrzna D | 145mm |
| Szerokość B | 45mm |
| Masa | 3,989kg |
| Temperatura pracy | -30…120 °C |
| Axial runout | 3µm |
|---|---|
| Basic dynamic load rating, axial | 93 000N |
| Basic static load rating, axial | 214 000N |
| Bore diameter lower tolerance | -0,008mm |
| Bore diameter upper tolerance | 0mm |
| Connection thread for lubrication | M6 |
| Contact angle | 60° |
| Distance of extraction slot | 35mm |
8660,50 złnetto
+ VAT 23% = 10 652,42 zł brutto
Dobierz 9 szt., żeby zejść do 8227,48 zł
| od 1 szt. | — | 8660,50 zł |
| od 10 szt. | −5% | 8227,48 zł |
| od 50 szt. | −8% | 7967,66 zł |
| od 250 szt. | −12% | 7621,24 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Fatigue load limit, axial |
|---|
| 13 000N |
| Fixing holes diameter | 8,8mm |
|---|
| Marketing category | XL |
|---|
| Mass moment of inertia | 13,7kg*cm² |
|---|
| Maximum diameter of housing | 100mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum diameter shaft | 82mm |
|---|
| Number of holes in adjacent construction | 8 |
|---|
| Outside diameter lower tolerance | -0,015mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch circle diameter fixing holes | 120mm |
|---|
| Pitch quantity of fixing holes | 8 |
|---|
| Pitch separation angle of holes in adjacent construction | 45° |
|---|
| Pitch separation angle of fixing holes | 45° |
|---|
| Position tolerance of bore in the housing | 0,2mm |
|---|
| Recommended INA precision locknut for axial locking | AM60 |
|---|
| Recommended INA precision locknut for radial locking | ZMA60/98 |
|---|
| Required locknut force axial | 16 700N |
|---|
| Rib diameter inner ring | 85mm |
|---|
| Rigidity axial | 1 300N/µm |
|---|
| Size of fixing screws | M8 |
|---|
| Tightening torque for the recommended INA precision locknut | 100Nm |
|---|
| Tilting rigidity | 1 650Nm/mrad |
|---|
| Tolerance class | Standard |
|---|
| Width lower tolerance | -0,25mm |
|---|
| Width of extraction slot | 3mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Sealing | 2RS |
|---|
