INA
| Średnica wewnętrzna d | 6mm |
|---|---|
| Średnica zewnętrzna D | 19mm |
| Szerokość B | 12mm |
| Masa | 38,5g |
| Temperatura pracy | -30…120 °C |
| Axial runout | 2µm |
|---|---|
| Basic dynamic load rating, axial | 4 550N |
| Basic static load rating, axial | 5 700N |
| Bearing friction torque | 0,01Nm |
| Bore diameter lower tolerance | -0,003mm |
| Bore diameter upper tolerance | 0,002mm |
| Fatigue load limit, axial | 260N |
| Fixing boring diameter | 3,5mm |
1485,90 złnetto
+ VAT 23% = 1827,66 zł brutto
Dobierz 9 szt., żeby zejść do 1411,61 zł
| od 1 szt. | — | 1485,90 zł |
| od 10 szt. | −5% | 1411,61 zł |
| od 50 szt. | −8% | 1367,03 zł |
| od 250 szt. | −12% | 1307,59 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Flange width |
|---|
| 22mm |
| Limiting speed for grease lubrication | 22 800 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZM06 |
|---|
| Locknut force axial | 2 010N |
|---|
| Mass moment of inertia | 0,0019kg*cm² |
|---|
| Maximum diameter of shaft shoulder | 15mm |
|---|
| Minimum diameter shaft shoulder | 9mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screws | 4 |
|---|
| Outside diameter lower tolerance | -0,01mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch circle diameter (holes) | 24mm |
|---|
| Position tolerance | 0,1mm |
|---|
| Rib diameter inner ring | 12mm |
|---|
| Rigidity axial | 150N/µm |
|---|
| Screw size | M3 |
|---|
| Thermally permissible speed | 14 000 1/min |
|---|
| Thickness of flange | 5mm |
|---|
| Tightening torque nut | 2Nm |
|---|
| Tilting stiffness | 4Nm/mrad |
|---|
| Width lower tolerance | -0,25mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Sealing | 2Z |
|---|
