INA
| Średnica wewnętrzna d | 6mm |
|---|---|
| Średnica zewnętrzna D | 24mm |
| Szerokość B | 15mm |
| Masa | 59g |
| Temperatura pracy | -30…120 °C |
| Axial runout | 2µm |
|---|---|
| Basic dynamic load rating, axial | 6 900N |
| Basic static load rating, axial | 8 500N |
| Bearing friction torque | 0,04Nm |
| Bore diameter lower tolerance | -0,003mm |
| Bore diameter upper tolerance | 0,002mm |
| Fatigue load limit, axial | 385N |
| Fixing boring diameter | 4,5mm |
1598,10 złnetto
+ VAT 23% = 1965,66 zł brutto
Dobierz 9 szt., żeby zejść do 1518,20 zł
| od 1 szt. | — | 1598,10 zł |
| od 10 szt. | −5% | 1518,20 zł |
| od 50 szt. | −8% | 1470,25 zł |
| od 250 szt. | −12% | 1406,33 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Flange width |
|---|
| 27mm |
| Limiting speed for grease lubrication | 16 400 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZM06 |
|---|
| Locknut force axial | 2 404N |
|---|
| Mass moment of inertia | 0,0044kg*cm² |
|---|
| Maximum diameter of shaft shoulder | 18mm |
|---|
| Minimum diameter shaft shoulder | 9mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screws | 4 |
|---|
| Outside diameter lower tolerance | -0,01mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch circle diameter (holes) | 32mm |
|---|
| Position tolerance | 0,1mm |
|---|
| Rib diameter inner ring | 14mm |
|---|
| Rigidity axial | 200N/µm |
|---|
| Screw size | M4 |
|---|
| Thermally permissible speed | 6 800 1/min |
|---|
| Thickness of flange | 6mm |
|---|
| Tightening torque nut | 2Nm |
|---|
| Tilting stiffness | 8Nm/mrad |
|---|
| Width lower tolerance | -0,25mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Sealing | 2RS |
|---|
