INA
| Średnica wewnętrzna d | 8mm |
|---|---|
| Średnica zewnętrzna D | 32mm |
| Szerokość B | 20mm |
| Masa | 0,132kg |
| Temperatura pracy | -30…120 °C |
| Axial runout | 2µm |
|---|---|
| Basic dynamic load rating, axial | 12 500N |
| Basic static load rating, axial | 16 300N |
| Bearing friction torque | 0,04Nm |
| Bore diameter lower tolerance | -0,005mm |
| Bore diameter upper tolerance | 0mm |
| Fatigue load limit, axial | 740N |
| Fixing boring diameter | 5,5mm |
1725,10 złnetto
+ VAT 23% = 2121,87 zł brutto
Dobierz 9 szt., żeby zejść do 1638,85 zł
| od 1 szt. | — | 1725,10 zł |
| od 10 szt. | −5% | 1638,85 zł |
| od 50 szt. | −8% | 1587,09 zł |
| od 250 szt. | −12% | 1518,09 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Flange width |
|---|
| 35mm |
| Limiting speed for grease lubrication | 15 500 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZM08 |
|---|
| Locknut force axial | 3 468N |
|---|
| Mass moment of inertia | 0,02kg*cm² |
|---|
| Maximum diameter of shaft shoulder | 25mm |
|---|
| Minimum diameter shaft shoulder | 11mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screws | 4 |
|---|
| Outside diameter lower tolerance | -0,01mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch circle diameter (holes) | 40mm |
|---|
| Position tolerance | 0,1mm |
|---|
| Rib diameter inner ring | 19mm |
|---|
| Rigidity axial | 250N/µm |
|---|
| Screw size | M5 |
|---|
| Thermally permissible speed | 9 500 1/min |
|---|
| Thickness of flange | 8mm |
|---|
| Tightening torque nut | 4Nm |
|---|
| Tilting stiffness | 20Nm/mrad |
|---|
| Width lower tolerance | -0,25mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Sealing | 2Z |
|---|
