INA
| Średnica wewnętrzna d | 10mm |
|---|---|
| Średnica zewnętrzna D | 32mm |
| Szerokość B | 20mm |
| Masa | 0,124kg |
| Temperatura pracy | -30…120 °C |
| Axial runout | 2µm |
|---|---|
| Basic dynamic load rating, axial | 13 400N |
| Basic static load rating, axial | 18 800N |
| Bearing friction torque | 0,12Nm |
| Bore diameter lower tolerance | -0,005mm |
| Bore diameter upper tolerance | 0mm |
| Fatigue load limit, axial | 850N |
| Fixing boring diameter | 5,5mm |
1743,60 złnetto
+ VAT 23% = 2144,63 zł brutto
Dobierz 9 szt., żeby zejść do 1656,42 zł
| od 1 szt. | — | 1743,60 zł |
| od 10 szt. | −5% | 1656,42 zł |
| od 50 szt. | −8% | 1604,11 zł |
| od 250 szt. | −12% | 1534,37 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Flange width |
|---|
| 35mm |
| Limiting speed for grease lubrication | 10 900 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZM10 |
|---|
| Locknut force axial | 4 891N |
|---|
| Mass moment of inertia | 0,029kg*cm² |
|---|
| Maximum diameter of shaft shoulder | 27mm |
|---|
| Minimum diameter shaft shoulder | 14mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screws | 4 |
|---|
| Outside diameter lower tolerance | -0,01mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch circle diameter (holes) | 40mm |
|---|
| Position tolerance | 0,1mm |
|---|
| Rib diameter inner ring | 21mm |
|---|
| Rigidity axial | 325N/µm |
|---|
| Screw size | M5 |
|---|
| Thermally permissible speed | 4 600 1/min |
|---|
| Thickness of flange | 8mm |
|---|
| Tightening torque nut | 6Nm |
|---|
| Tilting stiffness | 25Nm/mrad |
|---|
| Width lower tolerance | -0,25mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Sealing | 2RS |
|---|
