INA
| Średnica wewnętrzna d | 6mm |
|---|---|
| Średnica zewnętrzna D | 24mm |
| Szerokość B | 15mm |
| Masa | 0,04kg |
| Temperatura pracy | -30…120 °C |
| Axial runout | 5µm |
|---|---|
| Basic dynamic load rating, axial | 6 900N |
| Basic static load rating, axial | 8 500N |
| Bearing frictional torque | 0,04Nm |
| Bore diameter lower tolerance | -0,005mm |
| Bore diameter upper tolerance | 0,003mm |
| Contact angle | 60° |
| Fatigue load limit, axial | 385N |
666,60 złnetto
+ VAT 23% = 819,92 zł brutto
Dobierz 9 szt., żeby zejść do 633,27 zł
| od 1 szt. | — | 666,60 zł |
| od 10 szt. | −5% | 633,27 zł |
| od 50 szt. | −8% | 613,27 zł |
| od 250 szt. | −12% | 586,61 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Limiting speed for grease lubrication |
|---|
| 16 400 1/min |
| Mass moment of inertia | 0,0044kg*cm² |
|---|
| Maximum diameter of housing | 19mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Minimum diameter shaft | 9mm |
|---|
| Outside diameter lower tolerance | -0,01mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Recommended INA precision locknut for radial locking | ZM06 |
|---|
| Required locknut force axial | 2 404N |
|---|
| Rib diameter inner ring | 14mm |
|---|
| Rigidity axial | 200N/µm |
|---|
| Thermally safe operating speed | 6 800 1/min |
|---|
| Tightening torque for the recommended INA precision locknut | 2Nm |
|---|
| Tilting rigidity | 8Nm/mrad |
|---|
| Tolerance class | PE |
|---|
| Width lower tolerance | -0,25mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Sealing | 2RS |
|---|
