INA
| Średnica wewnętrzna d | 8mm |
|---|---|
| Średnica zewnętrzna D | 32mm |
| Szerokość B | 20mm |
| Masa | 88,7g |
| Temperatura pracy | -30…120 °C |
| Axial runout | 2µm |
|---|---|
| Basic dynamic load rating, axial | 13 800N |
| Basic static load rating, axial | 16 300N |
| Bearing frictional torque | 0,08Nm |
| Bore diameter lower tolerance | -0,005mm |
| Bore diameter upper tolerance | 0mm |
| Contact angle | 60° |
| Fatigue load limit, axial | 990N |
883,80 złnetto
+ VAT 23% = 1087,07 zł brutto
Dobierz 9 szt., żeby zejść do 839,61 zł
| od 1 szt. | — | 883,80 zł |
| od 10 szt. | −5% | 839,61 zł |
| od 50 szt. | −8% | 813,10 zł |
| od 250 szt. | −12% | 777,74 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Limiting speed for grease lubrication |
|---|
| 12 100 1/min |
| Marketing category | XL |
|---|
| Mass moment of inertia | 0,02kg*cm² |
|---|
| Maximum diameter of housing | 26mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Minimum diameter shaft | 11mm |
|---|
| Outside diameter lower tolerance | -0,01mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Recommended INA precision locknut for radial locking | ZM08 |
|---|
| Required locknut force axial | 3 468N |
|---|
| Rib diameter inner ring | 19mm |
|---|
| Rigidity axial | 250N/µm |
|---|
| Thermally safe operating speed | 5 100 1/min |
|---|
| Tightening torque for the recommended INA precision locknut | 4Nm |
|---|
| Tilting rigidity | 20Nm/mrad |
|---|
| Tolerance class | Standard |
|---|
| Width lower tolerance | -0,25mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Sealing | 2RS |
|---|
