INA
| Średnica wewnętrzna d | 12mm |
|---|---|
| Średnica zewnętrzna D | 42mm |
| Szerokość B | 25mm |
| Masa | 0,197kg |
| Temperatura pracy | -30…120 °C |
| Axial runout | 5µm |
|---|---|
| Basic dynamic load rating, axial | 17 100N |
| Basic static load rating, axial | 25 000N |
| Bearing frictional torque | 0,16Nm |
| Bore diameter lower tolerance | -0,01mm |
| Bore diameter upper tolerance | 0mm |
| Contact angle | 60° |
| Fatigue load limit, axial | 1 140N |
951,90 złnetto
+ VAT 23% = 1170,84 zł brutto
Dobierz 9 szt., żeby zejść do 904,31 zł
| od 1 szt. | — | 951,90 zł |
| od 10 szt. | −5% | 904,31 zł |
| od 50 szt. | −8% | 875,75 zł |
| od 250 szt. | −12% | 837,67 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Limiting speed for grease lubrication |
|---|
| 9 200 1/min |
| Mass moment of inertia | 0,068kg*cm² |
|---|
| Maximum diameter of housing | 33mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Minimum diameter shaft | 16mm |
|---|
| Outside diameter lower tolerance | -0,011mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Recommended INA precision locknut for radial locking | ZM12 |
|---|
| Required locknut force axial | 5 307N |
|---|
| Rib diameter inner ring | 25mm |
|---|
| Rigidity axial | 375N/µm |
|---|
| Thermally safe operating speed | 3 800 1/min |
|---|
| Tightening torque for the recommended INA precision locknut | 8Nm |
|---|
| Tilting rigidity | 50Nm/mrad |
|---|
| Tolerance class | PE |
|---|
| Width lower tolerance | -0,25mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Sealing | 2RS |
|---|
