INA
| Średnica wewnętrzna d | 30mm |
|---|---|
| Średnica zewnętrzna D | 62mm |
| Szerokość B | 28mm |
| Masa | 0,399kg |
| Temperatura pracy | -30…120 °C |
| Axial runout | 2,5µm |
|---|---|
| Basic dynamic load rating, axial | 32 000N |
| Basic static load rating, axial | 64 000N |
| Bearing frictional torque | 0,25Nm |
| Bore diameter lower tolerance | -0,005mm |
| Bore diameter upper tolerance | 0mm |
| Contact angle | 60° |
| Fatigue load limit, axial | 3 850N |
1524,50 złnetto
+ VAT 23% = 1875,14 zł brutto
Dobierz 9 szt., żeby zejść do 1448,28 zł
| od 1 szt. | — | 1524,50 zł |
| od 10 szt. | −5% | 1448,28 zł |
| od 50 szt. | −8% | 1402,54 zł |
| od 250 szt. | −12% | 1341,56 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Limiting speed for grease lubrication |
|---|
| 6 700 1/min |
| Marketing category | XL |
|---|
| Mass moment of inertia | 0,73kg*cm² |
|---|
| Maximum diameter of housing | 53mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Minimum diameter shaft | 40mm |
|---|
| Outside diameter lower tolerance | -0,01mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Recommended INA precision locknut for axial locking | AM30 |
|---|
| Recommended INA precision locknut for radial locking | ZM30 |
|---|
| Required locknut force axial | 9 947N |
|---|
| Rib diameter inner ring | 45,5mm |
|---|
| Rigidity axial | 850N/µm |
|---|
| Thermally safe operating speed | 4 300 1/min |
|---|
| Tightening torque for the recommended INA precision locknut | 32Nm |
|---|
| Tilting rigidity | 300Nm/mrad |
|---|
| Tolerance class | Standard |
|---|
| Width lower tolerance | -0,25mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Sealing | 2Z |
|---|
