INA
| Średnica wewnętrzna d | 40mm |
|---|---|
| Średnica zewnętrzna D | 75mm |
| Szerokość B | 68mm |
| Masa | 1,286kg |
| Temperatura pracy | -30…120 °C |
| Axial runout | 2,5µm |
|---|---|
| Basic dynamic load rating, axial | 77 000N |
| Basic static load rating, axial | 202 000N |
| Bearing frictional torque | 1,05Nm |
| Bore diameter lower tolerance | -0,005mm |
| Bore diameter upper tolerance | 0mm |
| Contact angle | 60° |
| Fatigue load limit, axial | 12 300N |
4834,80 złnetto
+ VAT 23% = 5946,80 zł brutto
Dobierz 9 szt., żeby zejść do 4593,06 zł
| od 1 szt. | — | 4834,80 zł |
| od 10 szt. | −5% | 4593,06 zł |
| od 50 szt. | −8% | 4448,02 zł |
| od 250 szt. | −12% | 4254,62 zł |
Cena schodzi automatycznie po przekroczeniu progu w koszyku.
Faktura z terminem 30 dni · dostawa kurierem albo paletowa
| Limiting speed for grease lubrication |
|---|
| 4 000 1/min |
| Marketing category | XL |
|---|
| Mass moment of inertia | 4,52kg*cm² |
|---|
| Maximum diameter of housing | 67mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Minimum diameter shaft | 50mm |
|---|
| Outside diameter lower tolerance | -0,01mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Recommended INA precision locknut for axial locking | AM40 |
|---|
| Recommended INA precision locknut for radial locking | ZMA40/62 |
|---|
| Required locknut force axial | 13 412N |
|---|
| Rib diameter inner ring | 58mm |
|---|
| Rigidity axial | 1 750N/µm |
|---|
| Thermally safe operating speed | 1 800 1/min |
|---|
| Tightening torque for the recommended INA precision locknut | 55Nm |
|---|
| Tilting rigidity | 1 200Nm/mrad |
|---|
| Tolerance class | Standard |
|---|
| Width lower tolerance | -0,5mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Number of bearings | 2AP |
|---|
| Sealing | 2RS |
|---|
